User Instructions

FlashLink® USB PDF Reusable Data Logger

Model 40516

  • Single channel, internal sensor
  • 16K data points, non-volatile memory
  • -40°F/°C to 116°F/47°C measurement range
  • Automatically generates PDF report and CSV file
  • Ideal for monitoring ambient temperature
  • User programmable: manual or auto start, logging intervals, high/low alarms
  • Large easy-to-read LCD
  • Multi-language FlashLink Program Manager software
  • Summary analysis of data, with alarm information
  • Degree Minutes and MKT calculations
Applications:  Produce, Prepared Foods, Pharmaceuticals, Chemicals, Storage Units, Refrigerators

This reusable logger monitors ambient temperature in facilities, transport vehicles, storage and processing areas. It provides reports that are used for various applications, such as process or equipment verification and validation, thermal mapping, and regulatory compliance. Data is analyzed to identify trends and patterns, then used to improve management practices in areas such as processing and cold chain logistics. The PDF reports can be archived for record keeping, audits, and to comply with HACCP, FSMA and other regulatory requirements.

A built-in USB connector makes it easy to program and download the logger without special reading devices. FlashLink Program Manager software allows users to configure logging parameters, such as sample intervals, high/low alarm limits, automatic or manual start, and alarm delay. PDF reports display temperature history as a graph with summary analytics, as well as in table format. The unique feature of this unit is the on-board software, making it a plug-and-play logger allowing personnel in the field quick access to temperature reports. Data can be downloaded to a PC or tablet with USB port, without needing to install FlashLink Program Manager software on additional computers.


FlashLink® USB PDF Reusable Data Logger, Model 40516
DeltaTrak manufactures products under an ISO 9001:2015 registered quality management system
Measurement Range -40°F to 116°F (-40°C to 47°C)
Temperature Resolution 0.1°C over full temperature measurement range
Accuracy ±0.5°C from 0°C to 25°C ±1.0°C from 25°C to 47°C ±1.0°C from -40°C to 0°C
Data Capacity 16,000 data points
Data Download Time 5 seconds typical for 3823 points
Factory Programmable Alarm Levels High & Low levels over entire range, displayed on LCD
Battery 2 x AAA Lithium batteries, user replaceable Option to replace with 2 X AAA alkaline batteries
Dimensions 1.57" x 3.67" x 0.94" (40mm x 93.5 mm x 24mm)
Casing PC/ABS plastic
Weight 1.9 oz. (54 grams)
Shock Resistance Withstands 3-foot (1 meter) drop to hard surface
Certification CE Mark, NIST traceable, ROHS Compliant, BSS 7061 Compliant
FAA Compliance RTCA/DO-160
Display Red LED Alarm
IP Rating IP54 (with silicon cap on)
Storage conditions -4°F to 122°F (-20°C to 50°C) 0% to 95% RH w/o condensation
System Requirements Windows PC with current operating system Adobe reader
Programming FlashLink Program Manager Software
Download Requirements Direct USB connection
Patent No. 6,088,514


FlashLink Program Manager Software 6.7.2

Last Revised - 06/14/2021 FlashLink Program Manager

FlashLink Program Manager is a user-friendly and feature-packed software for programming and downloading the FlashLink Mini Multi-Use and USB Reusable Data Loggers. It is available to be downloaded from the link below. A license number is necessary in order to complete the installation.

To download FlashLink Program Manager click on the link below to launch the download form. Refer to the help file in the software for data logger configuration programming.

Download FlashLink Program Manager 6.7.2